ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA SECTION BTS LINE PADA PT XYZ

Ihsan Ridho Pratama; Sri Zetli

doi:10.33884/comasiejournal.v13i2.10324

Authors

Ihsan Ridho Pratama Universitas Putera Batam
Sri Zetli

DOI:

https://doi.org/10.33884/comasiejournal.v13i2.10324

Keywords:

FTA, HAZOP, Occupational Health and Safety, Work Risk

Abstract

This study aims to analyze potential occupational health and safety (OHS) risks in the BTS Line section of PT XYZ using the Hazard and Operability Study (HAZOP) and Fault Tree Analysis (FTA) methods. Based on workplace accident data from 2021 to 2024, frequent incidents include finger pinching, hand scratches, foot injuries, and burns. The identification process revealed 10 work risk activities with varying levels, with 58.82% categorized as high risk and 5.88% as extreme risk. FTA analysis showed that the main causes of accidents stem from human error, improper use of personal protective equipment (PPE), and suboptimal equipment design. This research recommends risk control measures through engineering controls, administrative controls, and routine employee training. The implementation of these strategies is expected to reduce workplace accidents and create a safer and more productive working environment.

References

Hirwandi. (2025). Pengendalian Risiko Melalui Penerapan Metode Job Safety Analysis ( JSA ) di Departemen Logistik. 1(1), 20–27.

Muhammad, I., & Susilowati, I. H. (2021). ANALISA MANAJEMEN RISIKO K3 DALAM INDUSTRI MANUFAKTUR DI INDONESIA : LITERATURE REVIEW. 5(April), 335–343.

Parmasari, D. H. (2021). Jurnal Kesehatan Masyarakat. 17(2), 213–224.

Perdana, M. R., Suroso, H. C., & Industri, T. (2024). ANALISIS RISIKO KECELAKAAN KERJA DENGAN METODE FAILURE MODE AND EFFECT ANALYSIS DAN FAULT TREE ANALYSIS UNTUK MENGURANGI TINGKAT RESIKO KECELAKAAN KERJA PADA EFFLUENT TREATMENT. Senastitan Iv, 1–7.Silalahi, M., & Saragih, S. P. . (2023). Implementasi Iot Pada Sistem Pembayaran Di Koperasi Sekolah. Prosiding Seminar Nasional Ilmu Sosial Dan Teknologi (Snistek), 5, 521–526. Https://Doi.Org/10.33884/Psnistek.V5i.8128

Restuputri, D. P., Prima, R., & Sari, D. (2015). MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY ( HAZOP ). 24–35.

Retnowati, E. (2023). PENGARUH PENGAWASAN KERJA DAN PENERAPAN PROGRAM KESELAMATAN DAN KESEHATAN KERJA KONSTRUKSI. 05(02), 32–38.

Sesardyanto, F. A., & Herwanto, D. (2025). MENGGUNAKAN METODE HAZARD AND OPERABILITY STUDY ( HAZOP ) PADA PT X. 136–143.

Saragih, S. Nopriadi.(2019). Pengaruh Budaya Terhadap Actual Use Digital Payment System Pada Pelaku Umkm Di Kota Batam. Journal Of Applied Informatics And Computing (Jaic), 3(2), 63

Vera Methalina Afma, Edi Sumarya, N. A. (2022). ANALISIS CACAT MENGGUNAKAN METODE FTA DAN FMEA PADA DEPARTEMEN BUFFING UNTUK MENURUNKAN JUMLAH UNIT CACAT. 10(1).

Yasmi, M. R., Amrullah, E., & Zeva, R. R. (2024). KESELAMATAN KERJA PADA INDUSTRI FURNITUR. 19(1), 14–25.

Yodfiatfinda. (2023). Jurnal Ilmu Kehutanan dengan Menggunakan Metode Fault Tree. 17(2), 206–217