Proses Pembuatan Mediapembelajaran Dudukan Mesin Perombakan

Authors

  • Aries Mulyana Rifa’i Universitas Majalengka

Keywords:

The learnig, media of the overhaul, machine holder, Solidwork 2017

Abstract

Making learning mediafor the remodel machine holder with the formatiion of hollow materials,pipes, plates, iron axles and scaffolding wheels that will be designed in such away, The purpose of this practical work is to find out the design of the engine overhoul stand, which refers to the manufacture of learning media for the overhaul machine holder. The method that will be used is the procces of observing, summarizing qnd recording data from the head of the light vehicle engineering study program. In a design, the first thing is to design a tool in the form of an image. The design is obtainedbased on the results of instrument observations and then modified so that the results of a good image design. The image design uses Solidworks 2017 software. The results of the simulation on the product modeling are stress, displacement, safety factor (FOS), and shear force. After carrying out practical work on the design of the overhaul machine holder on the Solidworks application, it can be concluded that the design determines the manufacture of learning media for the overhaul machine holder.

References

Pedomanpelaksanaankerjapraktek FTUNMA; I-Listpro.

https://www.researchgate.net/publication/336137043_Penerapan_Overhaul_Engine_Stand_Kijang.

Newstep Toyota Astra Motor 1994; TeknikKendaraanRinganOtomotif.

E-book 2017 Nuryana Eki.

Gunadi.(2008). TeknikBodiOtomotifJilid 2.Jakarta: DirektoratPembinaanSekolahMenengahKejuruan

MesinPemotongUmbi-UmbiandenganSoftware SolidWorks.Presisi, 18(2).

Nugroho, CahyoBudi. (2016).AnalisisSolidWorkspadaRangkaMesinPress Bottle Jack 20 Ton denganPerbedaan Material TypeAISI.JurnalIntegrasi, 8(1), 12-15

Sularso. & Suga, K. (2008). Dasar Perencanaan dan Pemilihan Elemen Mesin. Jakarta: PT Pradnya Paramita.

Anto, Edi. (2013). Optimasi Parameter Pemesinan terhadap Waktu Proses Pada Pemrograman Cnc Turning (Doctoral dissertation, Universitas Negeri Semarang).

Fuad, M. A. (2015). Analisis Defleksi Rangka Mobil Listrik Berbasis Angkutan Massal menggunakan Metode Elemen Hingga (Doctoral dissertation). Universitas Negeri Semarang).

Mulyanto, Tri & Sapto, Agung D. (2017). Analisis Tegangan Von Mises Poros

Dendy, M. Adjie & Abu Bakar (2018). Analisis Kekuatan Struktur Landing Skid Akibat Impact Saat Landing Dengan Variasi Beban Pada Helikopter Synergy N9. Jurnal Industri Elektro dan Penerbangan, 5(2).

Downloads

Published

2022-01-22

Issue

Section

Articles