PENDEKATAN METODE FAULT TREE ANALYSIS DALAM KESEHATAN DAN KESELAMATAN KERJA SERTA PENGARUHNYA TERHADAP PRODUKTIFITAS

Penulis

  • Firman Ardiansyah Ekoanindiyo Universitas Stikubank (UNISBANK) Semarang
  • antoni Universitas Stikubank Semarang
  • Endro Prihastono Universitas Stikubank Semarang
  • Enty Nur Hayati Universitas Stikubank Semarang

DOI:

https://doi.org/10.33884/jrsi.v7i1.4456

Kata Kunci:

Occupational safety and health, fault tree analysis, productivity

Abstrak

CV ABC is one of the manufacturing industries in Central Java that produces furniture products. The resulting products have good quality so that 60-70 percent of their products are exported while the rest are marketed domestically. The current production process, the application of occupational safety and health have not been fully implemented. From company data for three years, the number of work accidents is 9, 8, and 10 times. The number of hours lost was 154 hours, 168 hours, and 224 hours. Efforts are needed to prevent work accidents that can reduce work productivity. Based on the existing problems, the company needs to identify the causes of work accidents with a fault tree analysis method approach. The factors that cause work accidents can be identified, namely the work area, production process and storage and transfer. This work accident will cause worker productivity to decrease. In 2016 the productivity value was 0.99925, in 2017 the productivity level was 0.99929. In 2017 there was an increase in productivity due to the reduced number of lost hours. In 2018 there was a decrease in the productivity level to 0.99910 due to the increase in the number of lost hours of employees becoming more. The results of the "t" test measurement showed a decrease in the frequency level in 2017 and an increase in the frequency level in 2018. Severity measurements decreased in 2017 and increased in 2018. The safe t value in 2017 has increased. In 2018 there was a decline, so productivity in 2018 decreased. From the relationship between work safety and productivity, it is clear that work accidents cause productivity to decline. In 2016 the productivity value was 0.99925, in 2017 the productivity level was 0.99929.

Referensi

Anthony., Roberto,Noya., Sunday, The Application Of Hazard Identification And Risk Analysis (HIRA) And Fault Tree Analysis (FTA) Methods For Controlling Occupational Accidents In Mixing Division Dewa-Dewi Farm, Jurnal Ilmiah Teknik Industri, Volume 3 Nomor 2, 2015.

Anwar, Syukriah, Ayu, Analisis Kesehatan dan Keselamatan Kerja Berdasarkan Meode Fault Tree Analysis Pada Area Packing Di PT. Lafarge Cemet Lhokseumawe – Indonesia, Jurnal Sistem Teknik Industri, Volume 21 Nomor 1, 2019.

Benadikta., Firdamarsha, Bhaskara., Adwitya, Analisis Kausalitas Kecelakaan Konstruksi Berdasakan Penilaian Konsultan Pengawas Dengan Fault Tree Analysis (FTA), Tesis, Fakuktas Sain dan Teknologi, Universitas Teknologi Yogyakarta, 2020.

Budiono, A.M., Hiperkes dan Keselamatan Kerja, PT. Tri Tunggal Tata Fajar. Jakarta, 1992.

Foster,S. T., Managing Quality: an Integrative Approach, Pearson Education International, 2004.

Khoerularifudin., Ikhsan, Analisis Pengaruh Program Keselamatan Kerja Terhadap Produktivitas Dan Identifikasi Penyebab Kecelakaan Kerja Menggunakan Fault Tree Analysis (FTA), Skripsi, Fakultas Teknik, Unisbank Semarang, 2019.

Nugraha., Evan, Sari., Rini Mulyani, Analisis Defect Dengan Metode Fault Tree Analysis dan Failure More Effect Analysis, Organum : Jurnal Saintifik Manajemen dan Akuntansi, Volume 02 Nomor 02, 2019.

Nur., Muhammad, Harahap., Maimunah, Fiatno., Aris, Analisis Kecelakaan Dengan Menggunakan Metode Fault Tree Analysis, Jurnal Teknik Industri Terintegrasi (JUTIN), Volume 3 Nomor 2, Nopember 2019.

Ginting., Nopita Sari br, Kristiana., Retna, Analisis Efektivitas Pengendalian Risiko Kecelakaan Kerja Pada Pekerja Proyek Konstruksi Menggunakan Metode Fine dan Fault Tree Analysis, Jurnal Teknik UNDIP, Volume 41 Nomor 2, 2020.

Nur., Muhammad, Halbi., Suryandri, Analisa Lingkungan Kerja Dan Kesehatan Kerja (K3) Pada Studi Kasus Di PT. Asrindo Citraseni Satria, Specta Journal of Technology, Volume 3 Nomor 2, Agustus 2019.

Nur., Muhammad, Ariwibowo., Oki, Analisis Kecelakaan Kerja dengan Menggunakan Metode FTA Dan 5S Di PT. Jingga Perkasa Printing, Jurnal Teknik Industri, Volume 4, Nomor 1, 2018.

Purbiantoro., Alvian, Bhaskara., Adwitya, Fault Tree Analysis Dan Audit Akurasi Pada Penerapan Sistem Manajemen Keselamatan Konstruksi Terintegrasi, Jurnal Riset Rekayasa Sipil, Volume 3 Nomor 2, Maret 2020.

Saptadi., Singgih, Ardi., Fahmi, Usulan Perbaikan Sumber Daya Pada Area Assembly 2 Dengan Metode HAZARD And Operability Study Dan Fault Tree Analysis, J@ti Undip: Jurnal Teknik Industri, Volume 14, Nomor 2, Mei 2019.

Suma’mur, Keselamatan Kerja dan Pencegahan Kecelakaan, Jakarta, PT.Toko Gunung Agung, 1996.

Syarifuddin, Anwar, Indori., Putri, Analisis Kesehatan Dan Kecelakaan Kerja Dengan Metode Fault Tree Analysis (FTA) Pada Area Stasiun Pengumpul Di PT. Pertamina EP Asset 1 Rantau Field, Industrial Engineering Journal, Volume 2 Nomor 2, 2020.

Trisaid., Siti Nurlelyza, Analisi Risiko Kecelakaan Kerja Pada Kegiatan RIG Service Menggunakan Metode HIRARC Dengan Pendekatan FTA), Jurnal Ilmiah Teknik Industri, Volume 8 Nomor 1, 2020.

##submission.downloads##

Diterbitkan

2021-12-07

Terbitan

Bagian

Articles

Artikel paling banyak dibaca berdasarkan penulis yang sama