RANCANG BANGUN PROTOTYPE SISTEM PROTEKSI MOTOR DC BERBASIS MIKROKONTROLER DENGAN NOTIFIKASI TELEGRAM

Difa Al Baihaqqi; Nina Paramytha; Endah Fitriani; Tamsir Ariyadi

doi:10.33884/jif.v13i01.9940

Authors

Difa Al Baihaqqi Universitas Bina Darma
Nina Paramytha Universitas Bina Darma
Endah Fitriani Universitas Bina Darma
Tamsir Ariyadi Universitas Bina Darma

DOI:

https://doi.org/10.33884/jif.v13i01.9940

Keywords:

ESP 8266, DS18B20, DC Motor, PZEM 017t, KORESPONDENSI

Abstract

CTP / CTCP machine which is a machine used in the printing industry that functions to make printing plates. CTP (Computer to Plate) CTCP (Computer to Conventional Plate). Continuous usage of this machine may cause the vacuum blower motor to overheat and shut off, which could impede the creation of printing plates and ultimately halt output. The performance of the machine can be enhanced by using protective system technology on the vacuum blower motor. By using microcontroller Node MCU ESP 8266 as control system, using a DS18B20 as temperature sensor, two fan as cooler, PZEM 017t as voltage and current monitoring motor, LCD 16x2 as display showing the values of current, voltage, DC motor temperature, DC motor speed control, and telegram to monitoring system realtime. The research’s output is a prototype that uses a DC motor as vacuum blower motor for monitoring and cooler if the DC motor temperature reaches a certain point, it will automatically notify the user via a chatbot (Telegram). So that when used with the plate printing machine, it can subsequently aid in improving output results.

References

B. B. Al-Kansa, M. L. Iswanda, N. Kamilah, and Y. T. Herlambang, “Pengaruh Kemajuan Teknologi Terhadap Pola Hidup Manusia,” Indo-MathEdu Intellectuals Journal, vol. 4, no. 3, pp. 2966–2975, Dec. 2023, doi: 10.54373/imeij.v4i3.682.

Artgrafika.co.id, “Mesin CTP/ CTCP Yang Menguasai Segmen Percetakan Indonesia.” Accessed: Mar. 18, 2025. [Online]. Available: https://www.artgrafika.co.id/mesin-ctp-ctcp-yang-menguasai-segmen-percetakan-indonesia.html#:~:text=Bagi%20anda%20yang%20berkiprah%20dalam,yang%20langsung%20dikontrol%20melalui%20komputer.

Amsky Indonesia, “Mesin CTPCP.”

Binus University, “Proses Produksi Desain dengan Teknik Cetak Datar (Offset Lithography) : PrePress – Press – PostPress 1,” Binus University.

S. Purwanto, “Rancang Bangun Electric Power Converter (Catu Daya) Untuk Alat Anodizing Portable,” ENERGI & KELISTRIKAN, vol. 13, no. 2, pp. 86–94, Jun. 2021, doi: 10.33322/energi.v13i2.1141.

Zulkarnaini and F. Hafni, “Studi Analisa Rele Differensial Pada Proteksi Transformator 60 MVA Gardu Induk Pauh Limo,” Jurnal Teknik Elektro, vol. 9, no. 2, pp. 79–85, Jul. 2020, doi: 10.21063/JTE.2020.3133914.

Pasaribu, Faisal Irsan, and Muhammad Reza, “Rancang Bangun Charging Station Berbasis Arduino Menggunakan Solar Cell 50 WP,” RELE (Rekayasa Elektrikal dan Energi): Jurnal Teknik Elektro 3.2, pp. 46–55, 2021.

170211119 Ikram Muji, “Automatic Stop Refill Water Depot Berbasis Water Sensor Level,” Dec. 2023, Accessed: Mar. 18, 2025. [Online]. Available: https://repository.ar-raniry.ac.id/id/eprint/34278/

W. Aritonang, I. A. Bangsa, and R. Rahmadewi, “Implementasi Sensor Suhu DS18B20 dan Sensor Tekanan MPX5700AP menggunakan Mikrokontroller Arduino Pada Alat Pendeteksi Tingkat Stress,” Jurnal Ilmiah Wahana Pendidikan, vol. 7, no. 1, pp. 153–160, Feb. 2021, doi: 10.5281/ZENODO.4541278.

“10.+Izmi_Budhy_Sidik”.

P. Gunoto, A. Rahmadi, and E. Susanti, “PERANCANGAN ALAT SISTEM MONITORING DAYA PANEL SURYA BERBASIS INTERNET OF THINGS,” SIGMA TEKNIKA, vol. 5, no. 2, pp. 285–294, Nov. 2022, doi: 10.33373/sigmateknika.v5i2.4555.

“Sri Hartanto-Tegangan Motor DC Terhadap Berat Barang Pada Ban Berjalan”.

M. Furqan, S. Sriani, and M. N. Shidqi, “Chatbot Telegram Menggunakan Natural Language Processing,” Walisongo Journal of Information Technology, vol. 5, no. 1, pp. 15–26, Jun. 2023, doi: 10.21580/wjit.2023.5.1.14793.

R. J. Riska, “OTOMATISASI PENYIRAMAN TANAMAN DENGAN SENSOR SOIL MOISTURE,” Jurnal Portal Data, vol. 1, no. 2, Sep. 2021, Accessed: Mar. 19, 2025. [Online]. Available: http://portaldata.org/index.php/portaldata/article/view/29