Analisis Pengendalian Kualitas Produk Fatty Alcohol Dengan Menggunakan Metode Statistical Processing Control (SPC) Pada PT Ecogreen Oleochemicals
Keywords:
Statistical Process Control (SPC), Statistical Quality Control (SQC), FishboneAbstract
PT. Ecogreen Oleochemicals is a company engaged in the field of oleochemicals. The problem faced by the company is related to the products produced by the company, which in reality is always there is a difference with the standard specifications that have been established and damaged that tend to be high. The purpose of this study to analyze the factors causing and types of product damage that occur the better the quality of raw materials used, the better the quality of fatty alcohol produced. The method used in this study using statistical tools contained in Statistical Process Control (SPC) and Statistical Quality Control (SQC) and Fishbone diagram to determine the causal factors. Collecting data by collecting reports relating to production activities in the field. Based on the pareto chart that has been made obtained the highest level of damage is the type of damage due to tearing to the amount of damage 968 bag, then the second highest is the type of damage due to fall 542 bag. Other types of damage is product damage due to overheating as much as 436 bags and other types of damage as much as 99 bags.
References
Bakhtiar, S., Tahir, S. Hasni, R.A. (2013). Analisa Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control (SQC), Malikussaleh Industrial Engineering Journal, 2(1), 29–36.
Endro, P. (2012). Pengendalian Proses Statistik Untuk Meningkatkan Produktivitas Dan Kualitas Pada Industri. Dinamika Teknik, VI(2), 20–26.
Handayani, N. U., P, S. N. W., & Wibowo, H. A. (2009). Upaya Peningkatan Kualitas Pada Pembuatan Roda Castor 5 ” Menggunakan Metode Six Sigma Dan. Jurnal Ilmiah Teknik Industri, 2 (I), 18-35.
Harkit Dwi Hargo. (2013). Implementasi Metode Pengendalian Kualitas Pada Proses Produksi Tali Rafia Hitam dengan Menggunakan Metode Statistik Di UD Kartika Plastik Jombang, Jurnal Ilmiah Mahasiswa Univ. Surabaya, 2(1), 1–19.
Hayu Kartika. (2013). Analisis Pengendalian Kualitas Produk Cpe Film Dengan Metode Statistical Process Control Pada PT . MSI. Jurnal Ilmiah Teknik Industri, 1(1) 50-58.
Hendra Gunawan. (2013). Implementasi Pengendalian Kualitas dengan Menggunakan Metode Statistik Pada Pabrik Cat CV X Surabaya. Jurnal Ilmiah Mahasiswa Universitas Surabaya, 2(1), 1–20.
Irwan, D. H. (2015). Pengendalian Kualitas Statistik (Pendekatan Teoritis dan Aplikatif). In N. Abdul Hadis (Ed.). Bandung: Alfabeta.
Muhaimin, Sodikin, I., & Sidarto. (2013). Analisis Pengendalian Kualitas Produk
Dengan Penerapan. Jurnal REKAVASI, 1(1), 11–20.
Muchsin, M. (2010). Analisa Pengendalian Kualitas Pada Unit Pengantongan Semen di PT Semen Tonasa. Jurnal Ilmiah Matematika dan Terapan, 7(1), 19–26.
Natasya, M. (2012). Implementasi Pengendalian Kualitas Dengan Menggunakan Metode Statistik Pada PT Industri Marmer Indonesia Tulungagung. Jurnal Ilmiah Mahasiswa Univ. Surabaya, 1(1), 1–18.
Prihatiningtias, I., Wahyono, H., Musmedi, D. P. (2014). Analisis Pengendalian
Kualitas Produk Paving Block Menggunakan Statistical Quality Control (SQC) pada CV. Multi Bangunan Jember. Artikel Ilmiah Mahasiwa Univ. Jember. 1-7.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Prosiding Seminar Nasional Ilmu Sosial dan Teknologi (SNISTEK)
This work is licensed under a Creative Commons Attribution 4.0 International License.
