ANALISIS PENGENDALIAN KUALITAS PROSES WIREBOND ALU PADA PT. XYZ BATAM
DOI:
https://doi.org/10.33884/comasiejournal.v13i2.10321Keywords:
Wire bond Alu, IC, Defect, FMEA, FTAAbstract
This study was conducted at PT. XYZ Batam to analyze defects in the aluminum wire bonding process using the Orthodyne 7200 machine. The objective is to identify the most frequent defects, determine their root causes, and provide improvement recommendations. The methodology applied includes Failure Mode and Effect Analysis (FMEA) to calculate the Risk Priority Number (RPN), and Fault Tree Analysis (FTA) to trace the root causes. The results indicate that defects such as Lifted Bond on Die and Non-Stick Wedge on Lead have the highest RPN scores. The main contributing factors are suboptimal machine parameters, including bonding pressure, temperature, and ultrasonic frequency. Recommended improvements focus on better parameter control and enhanced operator training. This study is expected to support the company’s goal of achieving through more effective process control.
References
Ansori, F. A., & Gusniar, I. N. (2023). Penerapan Metode Seven Tools pada Pengendalian Kualitas Produk Cacat di PT. XYZ. Jurnal Serambi Engineering, 8(2). https://doi.org/10.32672/jse.v8i2.5991
Ardyansyah, R. (2020). Analisis Penyebab Cacat Produk Menggunakan Metode Failure Mode and Effect Analysis (FMEA) pada PT. Sinar Sanata Electronic Industry. 48.
Silalahi, M., & Saragih, S. P. . (2023). Implementasi Iot Pada Sistem Pembayaran Di Koperasi Sekolah. Prosiding Seminar Nasional Ilmu Sosial Dan Teknologi (Snistek), 5, 521–526. Https://Doi.Org/10.33884/Psnistek.V5i.8128
Atta Luthfi Nurul Falah, Khoirul Arief, & Radhinal Sa’id Riginianto. (2023). Analisis Pengendalian Kualitas Pada Tempe Menggunakan Metode Seven Tools Dan FMEA. Jurnal Teknologi Dan Manajemen Industri Terapan, 2(3). https://doi.org/10.55826/tmit.v2i3.264
Izzulhaq, F., Renosori, P., & Selamat. (2023). Peningkatan Kualitas Produk Genteng dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA). Bandung Conference Series: Industrial Engineering Science, 3(1). https://doi.org/10.29313/bcsies.v3i1.6697
Kartika, W. Y., Harsono, A., & Permata, G. (2016). USULAN PERBAIKAN PRODUK CACAT MENGGUNAKAN METODE FAULT MODEAND EFFECT ANALYSIS DAN FAULT TREE ANALYSIS PADA PT. SYGMA EXAMEDIA ARKANLEEMA. Jurnal Online Institut Teknologi Nasional Januari, 4.
Krisnaningsih, E., Sulistyo, A. B., Rahim, A., & Dwiyatno, S. (2022). Fuzzy risk priority number assessment to detect midsole product defects. Jurnal Sistem Dan Manajemen Industri, 6(1), 77–88. https://doi.org/10.30656/jsmi.v6i1.4013
Matondang, T. P., & Ulkhaq, M. M. (2018). Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller. Jurnal Sistem Dan Manajemen Industri, 2(2), 59. https://doi.org/10.30656/jsmi.v2i2.681
Novianti, N., & Saputra, A. (2023). Pengaruh Kualitas Produk, Minat Beli dan Perilaku Konsumen Terhadap Keputusan Pembelian di Minimarket Victoria Tiban. ECo-Buss, 6(1), 66–78. https://doi.org/10.32877/eb.v6i1.656
Nugroho, A. J. (2017). Evaluasi Gangguan Jaringan Telepon dengan Kombinasi Metode Fault Tree Analysis dan Failure Mode And Effect Analysis. Jurnal Ilmiah Teknik Industri, 16(2), 88. https://doi.org/10.23917/jiti.v16i2.2420
Priyambada, A., Finali, A., Satria, I., Dy, P., Umar, M. L., Eko, R., Utomo, P., Rekayasa, T., Politeknik, M., & Banyuwangi, N. (2024). ANALYSIS OF THE CAUSES OF DAMAGE TO CONVEYOR BELT AT PT XYZ USES THE FTA AND METHOD FMEA ANALISA PENYEBAB KERUSAKAN PADA BELT CONVEYOR DI PT XYZ MENGGUNAKAN METODE FTA DAN FMEA. Journal of Scientech Research and Development, 6(1). https://idm.or.id/JSCR/inde
Ridwan, W., Widiastuti, R., & Nurhayati, E. (2023). Analisis Pengendalian Kualitas Bibit Sawit Dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failutre Mode Effect Analysis (FMEA) di PT. Kapuas Sawit Sejahtera. Reslaj : Religion Education Social Laa Roiba Journal, 5(6). https://doi.org/10.47467/reslaj.v5i6.2741
Salah, B., Alnahhal, M., & Ali, M. (2023). Risk prioritization using a modified FMEA analysis in industry 4.0. Journal of Engineering Research (Kuwait), 11(4). https://doi.org/10.1016/j.jer.2023.07.001
Shiyamy, A. F., Rohmat, S., & Sopian, A. (2021). Artikel analisis pengendalian kualitas produk dengan. Jurnal Ilmiah Manajemen, 2(2), 32–45.
Saragih, S. Nopriadi.(2019). Pengaruh Budaya Terhadap Actual Use Digital Payment System Pada Pelaku Umkm Di Kota Batam. Journal Of Applied Informatics And Computing (Jaic), 3(2), 63
Suherman, A., & Cahyana, B. J. (2019). Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (FMEA) Dan Pendekatan Kaizen untuk Mengurangi Jumlah Kecacatan dan Penyebabnya. Seminar Nasional Sains Dan Teknologi, 16.
Supono, J. (2018). ANALISIS PENYEBAB KECACATAN PRODUK SEPATU TERREX AX2 GORETEX DENGAN MENGGUNAKAN METODE FAULT TREE ANALYSIS (FTA) DAN FAILURE MODE AND EFFECT ANALYSIS (FMEA)
