RANCANG ULANG MESIN PENCETAK BATAKO PADA PT BODEM MAS JAYA
DOI:
https://doi.org/10.33884/comasiejournal.v12i2.9770Keywords:
Concrete Block Machine, Kansei Engineering, Production Efficiency, RedesignAbstract
PT Bodem Mas Jaya is a company engaged in concrete block production. However, the company faces challenges in meeting production targets due to the limitations of its block-making machine, which can only produce two blocks per process. This study aims to redesign the block-making machine to improve efficiency and production capacity. Kansei Engineering was applied to identify user needs, resulting in 16 Kansei words such as ergonomic, productive, precise, and modern. The redesign features a four-mold system, enabling the machine to produce four blocks simultaneously, doubling production capacity. Additional features such as rubber barriers, tray holders, and mold lifters enhance stability, minimize material waste, and maintain block quality. The new design also emphasizes ease of maintenance, safety, and operational efficiency. With this redesign, the company is expected to meet the increasing market demand effectively.
References
Abdul, M. K. F., Yunus, M., & Jaladara, T. (2023). Perancangan Alat Pembuat Bata Merah Kapasitas 6000 Bata / Hari Design of a Red Brick Maker with a Capacity of 6000 Bricks / Day Kebutuhan akan batu bata sangat untuk pembangun dinding adalah sebuah variasinya . Pembuatan bata merah ini salah satu cara tra. 01(01), 19–25.
Adiasa, I., Aldrin, Fauzi, R., & Lestari, F. (2023). Perancangan Alat Pembuat Paving Block Dari Limbah Sampah Metode Kansei Engineering. 11(3), 240–252.
Antara, I. M. Y. M., Suriadi, I. G. A. K., & Setiawati, N. L. P. L. S. (2024). Perancangan Desain Kemasan Produk Basreng pada UMKM Kusukangemil Menggunakan Metode Kansei Engineering Jurnal Pendidikan Sains dan Teknologi Terapan. 01(03).
Antony, K. M., & Arunkumar, S. (2020). DFMA and Sustainability Analysis in Product Design. Journal of Physics: Conference Series, 1455(1). https://doi.org/10.1088/1742-6596/1455/1/012028
Arini, R. W., Wahyuni, R. S., Munikhah, I. A. T., Ramadhani, A. Y., & Pratama, A. Y. (2023). Perancangan Desain Kemasan Makanan Khas Daerah Keripik Tike Menggunakan Pendekatan Metode Kansei Engineering dan Model Kano. Jurnal INTECH Teknik Industri Universitas Serang Raya, 9(1), 42–52. https://doi.org/10.30656/intech.v9i1.5541
El Ahmady, F. R., Martini, S., & Kusnayat, A. (2020). Penerapan Metode Ergonomic Function Deployment Dalam Perancangan Alat Bantu Untuk Menurunkan Balok Kayu. JISI: Jurnal Integrasi Sistem Industri, 7(1), 21. https://doi.org/10.24853/jisi.7.1.21-30
Jatmiko, H. A., Kurniawan, A., & Ma’arif, R. (2023). Redesigning Food Packaging Using Kansei Engineering Method : Case Study at Griya Produksi SME. Jurnal Ilmiah Teknik Industri, 22(1), 58–66. https://doi.org/10.23917/jiti.v22i1.21563
Jawa, B., Amtiran, P. Y., & Ndoen, W. M. (2020). Analisis Titik Impas Volume Produksi Produk Batako Di Ribas Batako Kabupaten Kupang. Journal Of Management (Sme’s), 12(2), 167–178.
Kumala, I. S., & Suryanto, M. (2023). Analisis Pengendalian Kualitas Produk Batako dengan Menggunakan Statistical Process Control (SPC) pada PT. Varia Usaha Beton. Concepts of Small-Scale Food Processing, 262–288. https://doi.org/10.1039/bk9781788018401-00262
Kurniawan, E. (2022). Perancangan Jig Assy Knuckle Type 5 Cavity. 1(1), 10–23.
Lasa, A., Pulinggomang, Y., & Astuti, I. (2022). Analisis Pengendalian Kualitas Produk Batako Pada Ukm Indra Batako Di Desa Oeltua Kecamatan Taebenu Kabupaten Kupang. 14(2), 189–200.
