ANALISIS PENGENDALIAN KUALITAS PRODUK PADA PT XYZ
DOI:
https://doi.org/10.33884/comasiejournal.v13i1.10315Keywords:
Defect, FMEA, Quality control, RCA, RPNAbstract
Quality control is important to maintain the company's position in the eyes of consumers. PT XYZI is a company that produces electronic devices, one of the products has a defect rate that exceeds the company's target, the company's target for defective products is 2% and it is known that the highest defect percentage is 6.28% during the period April 2024 to March 2025. This study aims to as to provide improvement solutions.The research method used is Failure Mode and Effect Analysis (FMEA) to determine the severity rating, Occurance, detection and RPN calculation. The next stage uses Root Cause Analysis (RCA) to identify the root cause of the defect from the highest RPN value. Based on the results of the study, the failure mode from the calculation of the highest RPN value of 378 is the tombstone defect, the RPN value of 315 is the no wetting defect. The improvement solution for tombstone defects is special training for technicians to make machine adjustments. The improvement solution for the no wetting defect is an increase in operator accuracy in checking the pcb after printing.
References
Alifka, K. P., & Apriliani, F. (2024). Analisis Pengendalian Kualitas Produk Menggunakan Metode Statistical Process Control (SPC) dan Failure Mode and Effect Analysis (FMEA). Factory Jurnal Industri, Manajemen Dan Rekayasa Sistem Industri, 2(3), 97–118. https://doi.org/10.56211/factory.v2i3.486
Andespa, I. (2020). ANALISIS PENGENDALIAN MUTU DENGAN MENGGUNAKAN STATISTICAL QUALITY CONTROL (SQC) PADA PT.PRATAMA ABADI INDUSTRI (JX) SUKABUMI (Vol. 9).
Avriella Anggita, Ketut Satriawan, & Dan Agung Surwawan Wiranatha. (2021). Analisis Pengendalian Kualitas Produk X dengan Metode Six Sigma di PT. Y Analysis Quality Control of Product X by Using The Six Sigma Method at PT. Y (Vol. 9, Issue 3).
Silalahi, M., & Saragih, S. P. . (2023). Implementasi Iot Pada Sistem Pembayaran Di Koperasi Sekolah. Prosiding Seminar Nasional Ilmu Sosial Dan Teknologi (Snistek), 5, 521–526. Https://Doi.Org/10.33884/Psnistek.V5i.8128
Dewi, A. A., & Yuamita, F. (2022). Pengendalian Kualitas Pada Produksi Air Minum Dalam Kemasan Botol 330 Ml Menggunakan Metode Failure Mode Effect Analysis (FMEA) Di PDAM Tirta Sembada. In Jurnal Teknologi dan Manajemen Industri Terapan / JTMIT (Vol. 1).
F Shiyamy Achmad, Rohmat Siti, & Sopian Adi. (2021). ANALISIS_PENGENDALIAN_KUALITAS_PRODUK_DENGAN_STATI.
Gunawan, C. V., & Tannady, H. (2016). ANALISIS KINERJA PROSES DAN IDENTIFIKASI CACAT DOMINAN PADA PEMBUATAN BAG DENGAN METODE STATISTICAL PROSES CONTROL (Studi Kasus : Pabrik Alat Kesehatan PT.XYZ, Serang, Banten). In Jurnal Teknik Industri: Vol. XI (Issue 1).
Irfan Fauzi Hanan, A., & Suseno, A. (2025). Analisis Pengendalian Kualitas Produk Carton Box Flute CB dalam Mengurangi Cacat Creasing dengan Metode Failure Mode and Effect Analysis (FMEA) dan Root Cause Analysis (RCA) Di PT XYZ.
Nazia, S., Muhammad, F., & Safrizal. (2023). PERANAN STATISTICAL QUALITY CONTROL (SQC) DALAM PENGENDALIAN KUALITAS: STUDI LITERATUR (Vol. 4, Issue 3).
Prasetya, R. Y., Suhermanto, S., & Muryanto, M. (2021). Implementasi FMEA dalam Menganalisis Risiko Kegagalan Proses Produksi Berdasarkan RPN. Performa: Media Ilmiah Teknik Industri, 20(2), 133. https://doi.org/10.20961/performa.20.2.52219
Safrizal, D. M. (2016). Safrizal dan Muhajir: Pengendalian Kualitas dengan Metode Six Sigma Pengendalian Kualitas dengan Metode Six Sigma (Vol. 5, Issue 2).
Sari, I. S., & Sulistiyowati, W. (2021). Redesign of Dust Filter Tools in Small and Medium Industries (IKM) by Integrating Reverse Engineering and Root Cause Analysis (RCA). PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 3(1), 18–25. https://doi.org/10.21070/prozima.v3i1.1264
Sitompul, M. A. (2024). Implementasi Metode Root Cause Analysis (RCA) untuk Mengendalikan Reject Produk NP Project di PT. XYZ. Journal of Manufacturing in Industrial Engineering & Technology, 3(2), 83–92. https://doi.org/10.30651/mine-tech.v3i2.24157
Silalahi, M., & Saragih, S. P. (2021). Perancangan Website Penyedia Informasi Promosi Dan Diskon. Justin (Jurnal Sistem Dan Teknologi Informasi), 9 (2), 257–262.
Sony, B. J., & Utomo, Y. (2024). ANALISIS PENGENDALIAN KUALITAS MENGGUNAKAN METODE ROOT CAUSE ANALYSIS (RCA) DI PT. XYZ.
Suherman, A., & Cahyana, B. J. (2019). Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis (Vol. 16).
Wicaksono, A., Dhartikasari Priyana, E., & Nugroho, Y. P. (2023). Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode and Effects Analysis (FMEA) Pada Pompa Sentrifugal Di PT. X. In Jurnal Teknik Industri (Vol. 9, Issue 1).
