ANALISIS RISIKO KESELAMATAN DAN KESEHATAN KERJA PADA PEKERJAAN JOINT MV PANEL DI PT XYZ
DOI:
https://doi.org/10.33884/comasiejournal.v11i2.9083Keywords:
HIRADC, OHS, Risk control, Joint MV panelAbstract
PT XYZ is a company engaged in Industry and provider of business areas and business
support facilities. One of the facilities provided by PT XYZ is power plant construction. In
power plant construction there are various types of work, one of which is the joint Medium
Voltage (MV) panel process. The problem that occurs in this study is that there are cases
of work accidents that occur in the Joint mv panel process so that it is necessary to control
K3 risks to prevent work accidents. The purpose of this study is to identify potential hazards
and make control efforts to reduce the level of risk of hazards in joint mv panel work. The
method used in this research is HIRADC (Hazard Identification and Risk Assessment
Determining Control). The results of this study obtained a decrease in risk levels after
control, where there are 2 jobs (29%) with extreme risk categories and 5 jobs (71%) with
high-risk categories and no jobs with moderate and low risk levels. However, after
controlling, there are no more jobs with extreme risk and high-risk levels, there are only 2
jobs (29%) with moderate risk and 5 jobs (71%) with low risk. Proposals given to carry out
risk control are through affirming the work system and field work flow standards, improving
the system, improving the control system through administration, developing human
resources and improving the control system through engineering and PPE.
References
Astanto, A., & Zetli, S. (2023). Jurnal Comasie Jurnal Comasie. Jurnal Comasie, 6(2), 40–51. Retrieved from http://ejournal.upbatam.ac.id/ndex.php/comasiejournal%0AJurnal Comasie ISSN (Online) 2715-6265%0APERANCANGAN
Cholil, A. A., Santoso, S., Syahrial, Sinulingga, E., & Nasution, R. (2020). Penerapan Metode Hiradc Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Gas Uap. Jurnal Bisnis Dan Manajemen (Journal of Business and Management), 20(2), 41–64. Retrieved from https://jurnal.uns.ac.id/jbm/article/view/54633
Fuad, M., Indrayadi, M., & Nuh, S. M. (2019). Penerapan K3 (Keselamatan dan Kesehatan Kerja) Menggunakan Metode HIRADC (Hazard Identificasion, Risk Assesment, And Determining Control) Dan JSA (Job Safety Analysis) Pada Proyek Pembangunan Gedung Direktorat Reserse Kriminal Khusus Polda KALBAR. Jurnal PWK, Laut, Sipil, Tambang, 6, 1–5.
Harahap, I. M., Firdasasi, & Purwandito, M. (2022). Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Melalui Metode Hiradc Dan Metode Jsa Pada Proyek Lanjutan Pembangunan Rumah Sakit Regional Langsa. Menara: Jurnal Teknik Sipil, 17(2), 43–50. https://doi.org/10.21009/jmenara.v17i2.26853
Khusufi, U. N., Fasya, A. H. Z., Handayani, D., & Wijaya, S. (2023). Literature Review: Using HIRADC Method Analyzing the Risk of Work Accidents in The Manufacturing Sector in Indonesia. KESANS : International Journal of Health and Science, 2(5), 272–279. https://doi.org/10.54543/kesans.v2i5.134
Naufal Bahy, A. (2021). Penerapan K3 Menggunakan Metode Hiradc Pada Pekerjaan Pemasangan Curtain Wall Pada Proyek Pembangunan Gedung Jkt3 New Construction (Implementation of Osh Using the Hiradc Method on the Curtain Wall Installation Work on the Jkt3 New Construction Building P.
