ANALISIS PENGENDALIAN KUALITAS PRODUK CABLE PADA PT AMBER KARYA
DOI:
https://doi.org/10.33884/comasiejournal.v13i3.10466Kata Kunci:
Cable Wire Harness, DMAIC, Defective Products, Fishbone, Quality ImprovementAbstrak
PT Amber Karya is a manufacturing that produces cable as sembly wire harness for industry and households. Types of cable wire harness that are produced such as High Definition Multimedia Interface (HDMI) cables, Universal Serial Bus (USB) and Local Area Network (LAN) cables. Based on the data obtained, production using the LAN cable type Extrusion machine has a defect rate exceeding the tolerance limit reaching 6,169 or 8.23%. The purpose of this to calculate the most defects and the factors that cause defects to appear and provide the best proposal to reduce defects so as to improve the quality of the cable. The sigma method is the approach that is employed with five stages, namely the DMAIC phase, Define, measure, Analyse, Improve, and Control. The results showed that after implementing improvements the defect rate became 2,107 or 2.8%. The sigma level improved from 2.9 (82,253) to 3.4 (28,092). So That, the quality of cable can be improved.
Referensi
Pragastio, Gigih Amayu, Annisa Kesy Garside, and Thomy Eko Saputro. 2023. “Six Sigma Approach with Integration of FMEA-Fuzzy SWARA-Fuzzy WASPAS to Minimize Bottled Water Defects.” Jurnal Ilmiah Teknik Industri 22(1): 113–23. doi:10.23917/jiti.v22i1.21370.
Ulfah, Maria et al. 2023. “Penerapan Metode Six Sigma Dalam Pengendalian Kualitas Produk Kabel Low Voltage Konduktor Tembaga Pada PT JCC Tbk.” Journal of Systems Engineering and Management 2(1): 82. doi:10.36055/joseam.v2i1.19398.
Saragih, Azrani, Wanda Burma Sari Harahap, and Diora Febe Gultom. 2023. “Analisis Peningkatan Kualitas Untuk Mengurangi Cacat Produk Kabel NYA Di PT XYZ Menggunakan Metode Six Sigma.” Jurnal TALENTA Conference Series: Energy and Engineering (EE) 23(20): 6–1. doi:10.32734/ee.v6i1.1775.
Ulfah, Maria et al. 2023. “Penerapan Metode Six Sigma Dalam Pengendalian Kualitas Produk Kabel Low Voltage Konduktor Tembaga Pada PT JCC Tbk.” Journal of Systems Engineering and Management 2(1): 82. doi:10.36055/joseam.v2i1.19398.
Hakim, Ide Muhammad, and Ari Zaqi Al-faritsy. 2024. “Pengendalian Kualitas Produk Untuk Mengurangi Jumlah Kecacatan Dan Penyebab Pada Produk Kaos Menggunakan Metode Six Sigma Dan FMEA Di Konveksi XYZ.” Jurnal Sains Student Research 2(4): 95–107.
Darwinsyah, and Iwan Krisnadi. 2017. “Analisa Performansi Redaman ( Attenuation ) Kabel Fiber Optic Menggunakan Metode Six Sigma DMAIC.” XX.
Laia, Saferia Suiman, and Citra Indah Asmarawati. 2023. “Analisis Pengendalian Kualitas Printing Housing Top Melita Pada Pt Leon Teknologi Global.” Computer and Science Industrial Engineering (COMASIE) 9(8): 40. doi:10.33884/comasiejournal.v9i8.7969.
Ridho, Dharu Arhamar, and Suseno Suseno. 2023. “Analisis Pengendalian Kualitas Produk Dengan Metode Lean Six SIgma Pada PT. Djohartex.” Jurnal Inovasi dan Kreativitas (JIKa) 2(2): 64–82. doi:10.30656/jika.v2i2.6009.
Bayu, Aditya. 2023. “Pengendalian Kualitas Untuk Mengurangi Deffect Pada Produk Kabel N2X2Yb2Y Dengan Metode Dmaic Di Pt Kabelindo Murni Tbk.” Industrikrisna 12(1): 1–9. doi:10.61488/industrikrisna.v12i1.111.
Saryanto, Saryanto, Humiras Hardi Purba, and Aris Trimarjoko. 2020. “Improve Quality Remanufacturing Welding and Machining Process in Indonesia Using Six Sigma Methods.” Journal Europeen des Systemes Automatises 53(3): 377–84. doi:10.18280/jesa.530308.
Ibrahim, Ibrahim, Djauhar Arifin, and Anita Khairunnisa. 2020. “Analisis Pengendalian Kualitas Menggunakan Metode Six Sigma Dengan Tahapan Dmaic Untuk Mengurangi Jumlah Cacat Pada Produk Vibrating Roller Compactor Di Pt. Sakai Indonesia.” Jurnal KaLIBRASI : Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri 3(1): 18–36. doi:10.37721/kal.v3i1.639.
Fachrudin, Fahmi, Ari Zaqi, and Al Faritsy. 2025. “ANALISIS PENGENDALIAN KUALITAS UNTUK MENURUNKAN JUMLAH CACAT BENANG COTTON DENGAN METODE SIX SIGMA ( DMAIC ).” 3(1).
Bayu De Wanda Pura,Elly Islamiyah, Universitas Muhammadiyah. 2024. “Analisis Pengendalian Kualitas Pada Proses Drumming White Oil Pt. Abc Dengan Metode Six Sigma Dan Fmea Quality Control Analysis in White Oil Drumming Process Pt. Abc Using Six Sigma and Fmea Methods.” 7: 2117–28.
Sutrisno, and Anggia Arista. 2021. “Analisis Pengendalian Persediaan Bahan Baku Dengan MetodeEOQ Di PT Polytech Jaya Industri.” Jurnal Comasie 5(3): 98–103.
Silalahi, M., & Saragih, S. P. . (2023). Implementasi Iot Pada Sistem Pembayaran Di Koperasi Sekolah. Prosiding Seminar Nasional Ilmu Sosial Dan Teknologi (Snistek), 5, 521–526. Https://Doi.Org/10.33884/Psnistek.V5i.8128
Ramadhan, Muhammad Rezky. 2022. “Analisis Cacat Produk Kaos Kaki Dengan Metode Seven Tools Pada Abstrak.” 4: 23–31.
Wen Chuan, Mu et al. 2020. “Electronic Properties of Zigzag Silicene Nanoribbons with Single Vacancy Defect.” Indonesian Journal of Electrical Engineering and Computer Science 19(1): 77–84. doi:10.11591/ijeecs.v19.i1.pp77-84.
Ofosu, Robert Agyare, Erwin Normanyo, N-Yo Abdul-Aziz, and Stephen Smart Stickings. 2023. “Speed Control of an Electrical Cable Extrusion Process Using Artificial Intelligence-Based Technique.” Jurnal Nasional Teknik Elektro 1. doi:10.25077/jnte.v12n1.1045.2023.
