ANALISIS PENGENDALIAN KUALITAS PRODUKSI BAKSO FROZEN PADA UKM MULYA MANDIRI
DOI:
https://doi.org/10.33884/comasiejournal.v12i1.9581Kata Kunci:
FROZEN MEATBALLS, PRODUCT DEFECTS, QUALITY CONTROL, SMESAbstrak
Small and medium-sized enterprise (SMEs) Mulya Mandiri is a SMEs that produces frozen meatballs in Batam.In facing the challenges of maintaining the quality of their products with The limitations of resources, technology, capital, and human resources often become obstacles in implementing an effective quality control system. In the study, it was found that the reject or defect rate of frozen meatball products was quite high. The most common product defects found are the wrinkled texture of the meatballs, followed by the shape of the meatballs not being perfectly round, being flat, and the meatballs clumping together. From the obtained data, it will be processed using the Statistical Quality Control method, which has tools such as check sheets, histograms, Pareto diagrams, control charts, and fishbone diagrams. Then it can be analyzed using the Fault Tree Analysis method, which is useful for identifying the root causes of defects in the product, as well as the Failure Mode and Effect Analysis, which is useful for determining potential failure modes, assessing the occurrence and severity of failures, calculating the Risk Priority Number (RPN), and proposing corrective actions to reduce the RPN value.
Referensi
Alfatiyah, R., Bastuti, S., & Kurnia, D. (2020). Implementation of statistical quality control to reduce defects in Mabell Nugget products (case study at Pt. Petra Sejahtera Abadi). IOP Conference Series: Materials Science and Engineering, 852(1). https://doi.org/10.1088/1757-899X/852/1/012107
Ginting, R., & Supriadi, S. (2021). Defect analysis on PVC pipe using Statistical Quality Control (SQC) approach to reduce defects (Case Study: PT. XYZ). IOP Conference Series: Materials Science and Engineering, 1041(1), 012040. https://doi.org/10.1088/1757-899x/1041/1/012040
Ishak, A., Siregar, K., Ginting, R., & Manik, A. (2020). Analysis Roofing Quality Control Using Statistical Quality Control (SQC) (Case Study: XYZ Company). IOP Conference Series: Materials Science and Engineering, 1003(1). https://doi.org/10.1088/1757-899X/1003/1/012085
Maro, A., & Sumantika, A. (2024). ANALISIS PENGENDALIAN KUALITAS PRODUK REJECT PADA PT PIPA MAS PUTIH BATAM. JURNAL COMASIE, 10(03).
Muhandri, T., Putra Pratama, A., & Dase Hunaefi, D. (2019). Aplikasi Seven Tools pada Perbaikan Mutu Roundness Bakso Unyil di PT X Seven Tools’s Application for Roundness Quality Improvement of Small Meatball Production in PT X. Manajemen IKM, 14(1), 54–61. http://journal.ipb.ac.id/index.php/jurnalmpi/
Nuruddin, Moch., & Dharma, A. (2023). Analyzing Product Defects in the Production Process of Tempeh Using the FTA and FMEA Methods at CV. Aderina. MOTIVECTION : Journal of Mechanical, Electrical and Industrial Engineering, 5(3), 571–582. https://doi.org/10.46574/motivection.v5i3.276
Radianza, J., & Mashabai, I. (n.d.). JITSA Jurnal Industri & Teknologi Samawa ANALISA PENGENDALIAN KUALITAS PRODUKSI DENGAN MENGGUNAKAN METODE SEVEN TOOLS QUALITY DI PT. BORSYA CIPTA COMMUNICA (Vol. 1, Issue 1).
Romadhoni, M. I., Kecacatan, I., Kerangka…, P., Kerangka, P., Di, B., Ravana, P. T., Menggunakan, J., Fmea, M., Fta, D., Andesta, D., & Hidayat, D. (2022). IDENTIFICATION OF DEFECTS IN BUILDING FRAMEWORK PRODUCT USING FMEA AND FTA METHODS. In JIEOM (Vol. 05, Issue 02). https://ojs.uniska-bjm.ac.id/index.php/jieom/index
Rucitra, A. L., & Amelia, J. (2021). Quality control of bottled tea packaging using the Statistical Quality Control (SQC) and the Failure Mode and Effect Analysis (FMEA). IOP Conference Series: Earth and Environmental Science, 733(1). https://doi.org/10.1088/1755-1315/733/1/012057
Rucitra, A. L., & Fadiah, S. (2019). Penerapan Statistical Quality Control (Sqc) Pada Pengendalian Mutu Minyak Telon (Studi Kasus Di Pt.X). Agrointek, 13(1), 72. https://doi.org/10.21107/agrointek.v13i1.4920
Soleha, K., Aring, D., Lestari, H., & Saleh, Y. (2022). Analisis Break Event Point (BEP) dan Harga Pokok Produksi (HPP) Produk Frozen Food di Kecamatan Ambarawa Kabupaten Pringsewu (Studi Kasus pada CV Lezatku Food) Analysis Of Break Event Point and Cost of Production Frozen Food Products In Ambarawa Sub-District Pringsewu Regency (Case Study on CV Lezatku Food). Journal of Food System and Agribusiness, 6(2), 153–166. https://doi.org/10.25181/jofsa.v6i2.2514
Syahkhaafi, M., & Ratnasari, L. (2023). Upaya Peningkatan Kualitas Produk Corrugated Box dengan Pendekatan Fault Tree Analysis (FTA) dan Failure Mode and Effect Analysis (FMEA). Jurnal Teknik Industri Terintegrasi, 6(4), 1212–1222. https://doi.org/10.31004/jutin.v6i4.20250
Widyastuti, F. K., Anggraini, S. P. A., Fitri, A. C. K., & Mediaswanti, K. A. (2023). Strategi Pengembangan dan Tata Kelola Manajemen Usaha Mandiri “Bakso Wilujeng” di Kelurahan Ketawanggede - Kota Malang. Darmabakti : Jurnal Pengabdian Dan Pemberdayaan Masyarakat, 4(2), 246–254. https://doi.org/10.31102/darmabakti.2023.4.2.246-254
Wulandari, R. S., Hakim, L., & Haris, R. F. (2022). Journal Knowledge Industrial Engineering Analysis of Product Defects in the Packing Production Process at PT.XYZ Using FTA and FMEA Methods. Journal Knowledge Industrial Engineering), 9(1), 52–60. https://doi.org/10.35891/jkie.v9i1.2981
Yafi, M. M., Denny, M., & Cahyono, N. (2024). Perbaikan Kualitas dengan Metode Fault Tree Analysis (FTA) dan Failure Mode And Effect Analysis (FMEA) pada Industri Garam Di Jawa Timur. GREENOMIKA, 1, 94–102. https://doi.org/10.55732/unu.gnk.2024.06.1.10
