PERANCANGAN FASILITAS KERJA YANG ERGONOMIS PADA PROSES PEMOTONGAN MATERIAL DI DEPARTEMEN STORE DI PT PEGAUNIHAN TECNOLOGY INDONESIA
DOI:
https://doi.org/10.33884/comasiejournal.v12i3.9803Kata Kunci:
MsDS, NBM, REBA, Work FacilityAbstrak
This study is a study conducted on the Department Store operator at PT Pegaunihan Tecnology Indonesia, in the manual handling work process workers have a high risk of mulculoskeletal Disorders (MSDs). The study was conducted by observation and distributing questionnaires to workers, the results of the Nordyc Body Map (NBM) questionnaire showed a total of 24 workers complained of upper neck body parts, stiff neck with a percentage of over 90% of workers feeling these complaints. Furthermore, calculations with Rapid Entire Body Assessment (REBA) resulted in 3 workers with the highest risk with a high risk category. From this situation, improvements need to be made. To make improvements, anthropometric data is used, the body dimension data needed in the design is PTD (Front Arm Length), TSB (Standing Elbow Height) and Arm Span. After the calculation, the dimensions of the table were obtained with a width of 70 cm, a length of 110 cm and a height of 103 cm, the complaint value decreased from initially high risk to low risk.
Referensi
Akbar, T. M. (2023). Analisis Postur Tubuh Pekerja di Pabrik Roti Riza Bakery Menggunakan Metode Rapid Entire Body Assessment ( REBA ). Journal of Integrated System (JIS) Vol., 6(1), 32–41.
Galih, M., & Zetli, S. (2024). Perancangan Fasilitas Kerja Proses Pembuatan Bakso Pada Usaha Kecil Menengah Moro Asih. Jurnal Comaise, 05(10). Mindhayani, I., & Suhartono, S. (2022). Penilaian Postur Kerja Pada Pekerja Bagian Penggorengan Keripik. tekinfo: Jurnal Ilmiah Teknik Industri Dan Informasi, 11(1), 28–41. https://doi.org/10.31001/tekinfo.v11i 1.1713
Rahman, T. (2022). Desain Meja Kerja Proses Pencucian Film Radiography dengan Pendekatan Ergonomi. Jurnal Logistica, 2(3), 1–6.
Ramadhan, M. Y., Herwanto, D., & Wahyudin, W. (2021). Analisis Postur Kerja Operator Produksi Tahu Dengan Menggunakan Metode Rappid Upper Limb Assessment (RULA ) Di UKM Suci Rizki Bekasi. JURMATIS (Jurnal Manajemen Teknologi Dan Teknik Industri), 3(2), 117.https://doi.org/10.30737/jurmatis.v3i 2.1713
Salsabila. (2022). Analisis Manual Material Handling dan Postur Kerja Pada Bagian Packing Menggunakan Metode NOSH Multitask dan REBA di PT Sari Warna Asli V Kudus. Simposium Nasional RAPI XXI – 2022 FT UMS, 4(2), 73–79.
Simorangkir, R. P. (2021). Hubungan Faktor Ergonomi dengan Keluhan Musculuskeletal Disorders (MsDs) pada Pekerja Pembuatan Ulos. JUMANTIK (Jurnal Ilmiah Penelitian Kesehatan), 6(1),16.https://doi.org/10.30829/jumantik.v6 i1.7615
Wardani, A. T. (2023). Analisis faktor Resiko Musculosketal Disorder (MSDs) dengan Metode Nordic Bofy Map dan REBA pada Petugas Cleaning Service di RSU Permata Hati Semarapura. Advances in Social Humanities Research, 1(1), 43–51.
Wijaya, Y. (2024). Desain Meja dan Kursi Ergonomis dengan Metode REBA dan Antrometri untuk Mencegah Musculoskeletal Disorder. Kohesi: Jurnal Multidisiplin Saintek, 4(6), 2988–1986.
